Handmade in Sweden
Einar Armchair
7 495 kr
VAT included, excl. shipping
Read our Trustpilot reviews.
Covered for a decade. Read more
See our different financing options.
Description
Einar is a solid oak armchair with a deep seat and full-height back cushions, here in Black Oak with Jade Black vegan leather, handcrafted in Sweden from FSC-certified German oak.
Black leather on black-stained oak, the club chair rebuilt in Scandinavian lines. The fine-grained leather wipes clean with a damp cloth, the visible grain keeps the frame warm despite the dark tone, and the deep seat and tall back cushions make this the seat you end the evening in.
Like every by Crea original, Einar is designed by Alexandra Pettersson and handcrafted from solid FSC-certified German oak in our Malmö factory, and it arrives fully assembled. It carries 200 kg, the warranty runs ten years, and repair beats replacement here, with spare parts available long after purchase. Full dimensions sit in the dropdown below. Each one is made to order and ships in 20 to 25 days.
“Einar is Kent's oak sibling: the same relaxed seat, carried by solid oak that only grows more beautiful with age.”
Specifications
Dimensions
- Width
- 71 cm 28.0 in
- Seat depth
- 53 cm 20.9 in
- Height
- 72 cm 28.3 in
- Seat height
- 38 cm 15.0 in
- Armrest height
- 49 cm 19.3 in
- Weight
- 19 kg 41.9 lb
- Material
- Oak, Vegan Leather Oak, Vegan Leather
- Country of origin
- Sweden Sweden
- Designer
- Alexandra Pettersson Alexandra Pettersson
Materials & Construction
- Manufactured in
- Sweden, 100%
- Wood
- Solid German oak, A grade
- Certification
- FSC-certified
- Finish
- Black stain, sealed with natural matte lacquer
- Manufactured in
- Sweden, 100%
- Foam
- Cold cut foam 55 kg/m³
- Core
- Beech core plywood
- Manufacturer
- Spradling
- Collection
- Valencia
- Composition
- Vinyl topcoat on 100% polyester backing
- Weight
- 650 g/m²
- Martindale
- 300,000
- Lightfastness
- 7-8
- Fire resistance
- EN 1021-1/2
- Finish
- PERMABLOK3 easy-clean protection
- Fabric warranty
- 5 years
Durability & Certifications
Care & Maintenance
Fabric
Wipe down with a microfiber cloth, lukewarm water and neutral washing detergent. Do not use ph acidic or basic solutions like acetone or bleach.
Wood
Clean down with a microfibercloth, lukewarm water and a very neutral washing agent. Do NOT use acidic solutions.
Our Oak furniture is lacquered with an industrial lacquer that will fade over time. It is a protective layer. By using acidic solutions you will be removing this protection.
NEVER leave metal pans, pots or candleholders on top of an oak top. Oak naturally has tannic acids that will leave a black round mark if you leave metal objects on the surface.
Delivery, Returns & Assembly
Delivered to your door. 100% free returns on test pieces. Minimal assembly required.
FAQ
Wipe the oak with a damp cloth and mild soap, and keep it out of direct heat. On the cushions, blot spills straight away and dab gently with lukewarm water rather than scrubbing. The matte lacquer needs no oiling.
Yes. We do not offer a re-covering service, but every cushion can be bought separately and swapped yourself. A worn or marked cushion never means a new armchair, and it also lets you change the fabric later if the room changes.
It does not need to match. Oak suits light rooms, Dark Oak warms a room with tobacco-brown depth, and Black Oak reads almost graphic while the grain stays visible. Contrasting wood tones often look more deliberate than a near-match.
Allow roughly 70-80 cm of width for the armchair itself, plus a little room around it. Full dimensions are in the dropdown below, so you can check the depth against your floor plan before ordering.
Yes. The deep seat and full-height back cushions are made for long reading rather than a quick perch, and they rest on a solid oak frame that is weight-tested in our Malmö factory. Prefer a steel frame? The Kent is Einar's steel sibling.
Yes. Order free samples of Oak, Dark Oak and Black Oak together with the fabrics, or a test armchair with free returns, and compare the finishes in your own light.
Ten years. Einar is shaped, finished and assembled in our own factory in Malmö, Sweden from solid A-grade FSC-certified German oak, and every seat is rated for a maximum load of 200 kg (440 lbs).
Spare parts
The Journal
Norrbottens Destilleri
Far up in the north of Sweden, where the light stretches long across the summers and the winters fall quiet and dark, Dennis Bejedal built something he had carried with him for ...
Inside a 1907 Copenhagen Apartment.
In the historic Frederiksstaden district in central Copenhagen, Ditte and Rune's 358 square-metre apartment dates back to 1907 balances original architecture with a quieter Scan...
Pine Edge Villa
At the far edge of Stockholm archipelago, where pine trees meet granite and the Baltic Sea opens out in layers of blue, grey, and mist, lies Pine Edge Villa.
5 Ways to Style a Minimalist Kitchen
Discover five refined ways to style a minimalist kitchen using handcrafted furniture by by Crea®. From bold black contrasts to warm Scandinavian tones, this guide explores how t...
Why Solid Oak is the Cornerstone of Timeless Furniture
In a world where fast furniture often sacrifices quality for convenience, the enduring strength and character of solid oak furniture stand out. At by Crea®, we craft every oak p...
Inside the Factory – How Every Piece is Handmade in Sweden
In a decade of mass production, handmade furniture from Sweden stands as a quiet rebellion. At by Crea, every bar stool, table, and chair begins in a factory in southern Sweden....
5 Things to Consider Before Buying a Bar Stool
In the last 10 years, the kitchen island has become a central feature in modern homes, serving not just as a prep space, but as a hub for dining, working, and gathering. With th...